32 Power Hoe 1000
5. Maintenance
5
Governor
For smooth engine performance keep
governor linkages, springs and actuat-
ing devices clean and free from dust and
dirt. Do not bend or twist parts. (Gover-
nor linkages on carburetor B/6).
Exhaust system
Regularly clean the area arround the
exhaust (B/9) from grass, dirt, and in-
flammable deposits.
– Risk of fire!
Check before each operation.
Speed Control
Devices for actuating engine speed must
be adjusted correctly to start, operate
and shut off the engine at correct speed
rates.
è - Serviceç
Carburetor settings
To compensate for fuel, temperature,
height or load variations, a slight
carburetor re-adjustment may become
necessary. Only let the engine run with
the air filter and air filter cover mounted.
è - Serviceç
1 Idle speed setting screw
2 Throttle stop screw
66
66
6 A
1
2
To Next Page
Loading...
