Power Hoe 1000 33
5. Maintenance
5
Safety circuit lever
Check the function of the safety circuit le-
ver during each maintenance or repair work.
l
When releasing the lever (A/5) and with
the travelling clutch engaged, the engine
must be stopped automatically.
l
Check all electrical lines and plug con-
nections for their proper condition and re-
place all defective parts.
è - Serviceç
General
Watch out for fuel and oil leakage and
repair, if necessary.
Regularly check bolts and nuts for tight
fit and retighten, if necessary.
Slightly grease all gliding and moving
parts (e.g. speed control lever, hand lever
bearing, etc.) with Bio-lubricating grease
and Bio-slushing oil.
Cleaning
Machine
After each cleaning with a pressure washer
lubricate all lubrication points, oil and let
power hoe run for a short time to press water
out.
Apply grease generously to leave a grease
ring around bearings to prevent water, plant
sap, and dirt from penetrating.
Engine
Clean the engine only with a cloth. Avoid
spraying with a pressure washer, as water
might leak into ignition and fuel system,
causing malfunctions.
A/5
èI
66
66
6 A
To Next Page
Loading...
