To Next PageTo Next Page
Need help?Do you have a question about the Agria 400P and is the answer not in the manual?
Explains warning and operational symbols.
Lists parts for machine diagram A.
Lists parts for engine diagram B.
Detailed list of components for Figure A.
Detailed list of components for Figure B.
Detailed list of components for Figure C.
Detailed list of components for Figure D.
Guidance on lubricants, greases, oils, and fuel.
Advice on professional vs. DIY repairs.
Steps to unpack the base machine.
Instructions for attaching the steering handle.
Defines proper operation and general safety rules.
Precautions for the environment and engine start.
Safety during the engine start process.
Safe practices during operation and with attachments.
Specific safety for hoeing/mowing.
Safety during maintenance procedures.
Precautions for storage, fuel, oil, and tyres.
Interpretation of symbols and protective equipment.
Physical specifications and tyre details.
Details on engine manufacturer, type, bore, stroke, etc.
Machine performance and limits on inclines.
Overview of engine components and systems.
Operation of key control levers.
Using the fuel tap and clutch lever.
Modes of drive and speed selection.
Mounting and engagement modes of drive wheels.
Engaging PTO and using the parking stand.
How to adjust the steering handle.
Procedures for connecting and disconnecting attachments.
Installing and adjusting hoeing tools and depth bars.
Fitting and using ridger and strake wheels.
Initial setup and essential checks before use.
Step-by-step guide to start the engine.
Correct procedure for stopping the engine.
Operating guidelines and hazard awareness.
How to operate the machine in reverse.
Checking and changing engine oil.
Cleaning and replacing the air filter.
Servicing fuel lines and sediment bowl.
Maintenance of spark plug and cooling system.
Servicing governor, exhaust, and adjusting carburetor.
Servicing transmission oil and drive wheels.
Checking safety circuit and adjusting control levers.
Procedure for setting V-belt tension.
Routine cleaning and checks for the machine.
Steps for long-term storage.
Specifics for storing components and protecting the machine.
Diagnosing and resolving engine start and misfire problems.
Troubleshooting overheating and low power.
Resolving engine stalling and stopping problems.
Troubleshooting drive stopping and excessive vibration.
Schematic of the machine's electrical system.
Guide to lubrication points and intervals.
Available paints and emergency tyre repair kits.
List of replaceable components and spare parts.
Detailed list of components for Figure C.
Detailed list of components for Figure D.
Official statement of compliance with EU directives.
List of standards used for conformity assessment.
General| Brand | Agria |
|---|---|
| Model | 400P |
| Category | Lawn and Garden Equipment |
| Language | English |
