Agria 400P - Unpacking and Assembly; Machine Unpacking Steps; Steering Handle Assembly

agria Multi-Purpose Machine 400P 7
Unpacking and Assembly
E
1 Base machine
2 Steering handle
3 Steering handle attachment bolt
4 Hex nut
5 Drive wheels (accessory items)
l Open the box top.
l Cut the two rear corners open and
fold down the side.
l Remove the steering handle attach-
ment bolt (3 + 4).
l Pivot the steering handle (2) up-
wards. Then attach and tighten the bolt
(3 + 4).
l Attach the drive wheels (see instruc-
tions on page 20).
l Starting-up
See instructions on page 33.