14
agria Multi-Purpose Machine 400P
2. Specifications
2
Engine
Manufacturer: ..........................Honda
Engine type: .............. GX 200 QHQ4
Version: ....................... Fan-air cooled
1-cylinder, 4-stroke
petrol ohv engine
Bore: ........................................ 68 mm
Stroke: ..................................... 54 mm
Cubic capacity: ................... 196 ccm
Compression ratio:................. 8.5 : 1
Output: .................................... 4.8 kW
at 3,600 rpm
Max. torque:.......................... 13.2 Nm
at 3,000 rpm
Spark plug: ................ NGK BPR6 ES
Spark plug gap: ............... 0.7–0.8 mm
Ignition system:
Contactless solenoid ignition, ignition
point is pre-set, radio remote
screened according to VDE 0879
Valve lash (engine cold):
Intake: ................ 0.15 mm ± 0.02 mm
Outlet: ................ 0.20 mm ± 0.02 mm
Starter:
Soft-pull recoil starter with mechanical
decompression facility
Fuel tank capacity: .................... 3.6 l
Fuel: Standard regular grade petrol for
motor vehicles, octane number see
engine operating instructions
Air filter: .................. Dry element filter
with foamed preliminary filter
Carburetor: .......... Throttle valve type
Mixture control screw:
opened approx. 2 1/8 turns in base
setting
Rated speed: ..................... 3,600 rpm
Top no-load speed:...........3,850 rpm
Idling speed:...........1,250–1,600 rpm
Engine oil:
Filling quantity.................. approx. 0.6 l
Multi-grade oil SAE 10 W-40
SJ or higher quality grade
Operability on Slopes:
Continuous operation possible
up to ..................20° inclination (37 %)
Temporary operation possible
up to ..................25° inclination (47 %)
(with oil level at “max” = upper level
mark)
To Next Page
Loading...
