agria Multi-Purpose Machine 400P 13
2. Specifications
2
1
Dimensions:
a ........................................ 100 mm
b ........................................ 630 mm
c......................................... 160 mm
d ........................................ 380 mm
e ........................................ 700 mm
h .............................. 860–1080 mm
l........................................ 1200 mm
A .............. (13x5.00 - 6) 525 mm
A ..................... (3.50 - 6) 440 mm
A (Twin tyres 3.50 - 6) ..... 857 mm
A ..................... (4.00 - 8) 640 mm
A Hoeing tools ........... 450–650 mm
Clutch: ............................. V-belt clutch
with idler pulleys
between engine and gearbox
Friction clutch for reverse speed
Only use original agria V-belts!
(List of wear parts p49)
Transmission:...................Worm gear
with free-wheel drive mechanism on
drive wheels
Transmission oil SAE 90-API GL5
Filling quantity approx. 0.5 l
Speeds: ................... 3 forward speeds
(moving V-belt to another pulley)
1 reverse speed (friction wheel)
see table below
Steering handle: ... vibration damping,
height-adjustable,
side-adjustable without tools
Weight: ......................... Approx. 50 kg
Noise level:
Noise level ....................... L
p
= 84 dBA
in accordance with EN 11201 (at
operator’s ear)
Acoustic power level L
WA
= 96,1 dB(A)
in accordance with EN ISO 3744
Vibration acceleration value:
on handlebar:................ a
hw
< 2.5 m/s
2
in accordance with ISO 5349 at 85% of rated
engine speed with tool at work.
Speed Revolutions [rpm] Ground speed [km/h]
Wheel shaft
Pto Tyres
i
tot
n
dw
n
pto
13x5.00-6 3.50-6 4.00-8
I 67.5 55 1650 3.2 3.6 4.4
II 42.7 85 2550 5.0 5.6 6.9
III 28.1 125 3750 7.3 8.3 10.1
R 61.7 58 1740 3.4 3.8 4.7
Tyres: (Accessory) .............................
................ 13x5.00-6 (Grassland tyre)
....... 3.50 - 6 und 4.00 - 8 (Field tyre)
Tyre pressure: ........................ 1.0 bar
Multi-purpose machine
To Next Page
Loading...
