12 agria Multi-Purpose Machine 400P
1. Safety Instructions
1
When adding weight, make sure the tyre
pressure is correct.
Re-tighten bolts of drive-wheels or check
tightness when doing maintenance
work.
Electrical System and Battery
When working on the electrical system,
make sure the battery is disconnected
(negative terminal) (for tractors
equipped with battery).
Make sure to connect the battery prop-
erly – first connect the positive terminal
and then negative terminal. Disconnect
in reverse order.
Be careful with battery gases – explo-
sive!
Avoid spark discharge and open flames
near batteries.
Remove plastic cover (if equipped) to
recharge battery and to prevent highly
explosive gases from building up.
Careful when handling battery acid!
Only use specified circuit breakers. If the
circuit breakers are to strong, they will
destroy the electrical system – danger
of fire.
Always cover positive terminal with the
specified cover or terminal cap.
Persons having a pacemaker may not
touch live parts of the ignition system
when the engine is running.
Explanation of
Warning Signs
Before any cleaning,
maintenance, and re-
pair work switch off the
engine and pull spark
plug connector.
With the engine run-
ning, keep at a safe
distance from hoeing
or cutting tools.
Do not work without
guards in place. Be-
fore starting the en-
gine, bring guards in
proper position.
With the engine run-
ning, keep at a safe
distance from knife.
Do not touch moving
machinery parts. Wait
until they have come
to a complete stop.
With the engine run-
ning, keep at a safe
distance.
Only drive the attach-
ment at speed “I”.
Signs
When working with the
machine,wear individual protec-
tive ear plugs.
Wear protective gloves.
Wear solid shoes.
To Next Page
Loading...
