Agria 1000 - Page 4

4 Power Hoe 1000
Part Designations
Fig. A
1 Engine
2 Push plate for lateral handlebar adjustment
3 Steering handle
4 Speed control lever, engine shut-off switch
5 Safety circuit lever
6 Clutch lever
7 Pawl of clutch lever
8 Factory type plate
9 Steering handle height adjusting clamping lever (on the right side)
10 Clutch cable
11 Clutch cable setting screw on gearbox housing
12 R-clip on depth bar
13 Hoeing guard
14 Depth bar
15 Handle
16 Base specification hoeing tools, right
17 Receiving hole for front wheel attachment
18 Transmission oil fill/drain opening
19 Base specification hoeing tools, left
20 Attachment bolt for base specification tools
21 Guard disc
Fig. B
1 Fuel tank cap
2 Starter rope handle
3 Air strainer
4 Oil fill plug, dip-stick
5 Air filter
6 Carburetor / speed control governor
7 Engine type no. / identification no.
8 Spark plug / spark plug connector
9 Exhaust with guard
10 Fuel tank
11 Fuel tap