10
Two-wheel tractor agria 3600
Version 3600 (3+2): Steering brake
• Installing the driving wheels:
- 4.00-8: Install the driving wheels with the wheel nuts and washers on the wheel
flanges such that the arrow-shaped tyre pattern points in the driving direction.
- 4.00-10: Screw the wheel adapter flanges on the driving wheels. Next, install the
driving wheels with the wheel nuts and washers on the wheel flanges such that the
arrow-shaped tyre pattern points in the driving direction.
• Installing the overdrive shifting rod:
Insert the shifting rod from below into the shifting rod guide (I). Screw on the handle
ball (II), plug the shifting rod on the gearshift lever (III) and secure it with a lynch pin
(IV).
Performing initial startup. See page 40.
To Next Page
Loading...
