Devices and Operating Elements
Two-wheel tractor agria 3600
25
Gearbox
When the steering bar is swivelled through 180° (for front implement attachment),
the position of the shifting rods for gear and PTO shifting is laterally reversed. See
page 32.
Two-wheel tractor position
(rear implement attachment)
Implement carrier position
(front implement attachment)
The gear shifting rod is right
(in driving direction)
The gear shifting rod is left
(in driving direction)
the PTO shaft switching rod
is left
the PTO shaft switching rod
is right
Version 3600 (2+2)
The machine is equipped with a toothed manual gearbox with
• 2 forward gears and 2 reverse gears
• rigid hexagonal wheel shaft.
Shift gears only when the machine is at standstill (disengaged)!
Gear shifting
The gears are shifted with the gear shifting rod
(B/7)!
Idle position "0" between the individual gears.
The selected gear shows at the sticker on the
gearbox.
Actuate the clutch before you switch gears.
Version 3600 (3+2)
The machine is equipped with a toothed manual gearbox with
• 3 forward gears and 2 reverse gears
• wheel switching at both sides
• individual wheel steering brakes
To Next Page
Loading...
