To Next PageTo Next Page
Need help?Do you have a question about the Agria 3600 Series and is the answer not in the manual?
Introduction to the agria 3600 two-wheel tractor and its Honda petrol engine.
Area for entering machine identification details.
List of components included with the machine.
Procedure for removing the machine from its packaging.
Steps for assembling the machine after unpacking.
Defines proper application, misuse, and associated hazards of the machine.
Covers general safety rules, working areas, and operational precautions.
Guidelines for safe startup, operation, and handling of implements.
Safety measures for maintenance, cleaning, storage, and specific components.
Covers machine, engine, gearbox, speeds, oil, PTO, steering, and weights.
Details on tyres, pressure, track, dimensions, sound, and vibration values.
Covers engine operation, idling, air filter, cooling, ignition, speed lever, and safety circuit.
Details on operating the clutch and engine stop switch.
Explanation of the gearbox, gear shifting, and overdrive.
Operation of the single-wheel brake system for steering assist.
How to shift the PTO shaft and the function of the reverse gear interlock.
Instructions for adjusting the steering bar's height and lateral position.
Instructions for installing wheels and adjusting track on the 2+2 model.
Instructions for installing wheels, mounting bolts, and torque on the 3+2 model.
Steps for attaching and removing rear implements.
Steps for attaching and removing front implements.
Initial setup, including engine oil and fuel filling.
Essential checks before operating the engine and machine.
Information on maximum slope angles and restarting a stalled engine on slopes.
Specific working procedures for tilling/mowing and safe parking on slopes.
Recommendations for lubricants and general maintenance checks.
Procedure for checking and changing the engine oil level.
Procedures for checking and changing the gearbox oil level.
Checking and tightening wheel bolts and nuts.
Steps for storing the machine and engine, including fuel management and protection.
Troubleshooting for engine start failures, misses, overheating, and erratic operation.
General