Safety Instructions
14
Two-wheel tractor agria 3600
Attach an implement in accordance with
the regulations and only at the specified
fixtures.
Always switch off the working tools dur-
ing a transport ride or when you drive to
adjacent working areas.
Secure machine and implement against
unauthorized use and rolling away when
you leave it. If necessary, install
transport or safety equipment, and put it
in protective position.
Hoeing equipment
When hoeing or tilling difficult soil (stony,
hard), there can be jerky movements of
the machine to the front and upwards.
Be particularly careful.
Ensure that the hoeing spur is properly
adjusted for hoeing.
Adjust the protective roofs for the hoeing
working depth such that only the parts of
the hoeing tools are not covered that
penetrate the soil.
Mowing equipment
When handled improperly, the sharp
edges of the mower knives can cause
significant injuries. Always wear protec-
tive gloves when you work on the
knives.
Ensure that the screwing movements
are away from the cutting edges when
you replace a knife and loosen or secure
the knife driver.
Wear protective goggles and protective
gloves when you grind the knives.
Ballast
Always attach ballast properly at the
attachment points provided.
Maintenance and cleaning
Only trained specialist personnel, who
can carry out professional maintenance
and repair, may carry out this work.
Do not carry out maintenance and clean-
ing with the engine running.
When working on the engine always
remove the ignition key (if present) and
also the spark plug connector in the
case of petrol engines.
Protective devices and tools that are
subject to wear and tear must be regu-
larly inspected and replaced if neces-
sary!
Damaged cutting tools must be re-
placed!
When replacing cutting tools use suita-
ble tools and protective gloves.
Do not carry out repair work such as
welding, grinding, drilling, etc. on struc-
tural, safety-relevant parts (such as
steering bar, tractor hitches, etc.)!
Keep the machine and attachments
clean, to avoid the risk of fire.
Regularly check nuts and bolts for tight-
ness and retighten if necessary.
After maintenance and cleaning, ensure
that the protective devices are re-
installed and properly adjusted!
Only use genuine Agria spare parts.
Carry out a functional and safety test
after completing the work.
Storage
Never store the machine in rooms with
open heating.
Do not park the machine in closed
rooms with fuel left in the tank. Fuel
vapours are hazardous.
Engine, fuel and oil
Do not run the engine in a closed room.
There is a high risk of poisoning! There-
fore always replace damaged exhaust
parts.
To Next Page
Loading...
