Agria 3600 Series - Speed Regulating Lever; Safety Circuit

3
Devices and Operating Elements
Two-wheel tractor agria 3600
23
Speed regulating lever
Use the speed regulating lever (B/3) on the
steering bar to continuously adjust the engine
speed between min = IDLE and max = FULL
THROTTLE as required.
Safety circuit
The machine is equipped with a safety circuit.
Stop position:
When the safety lever (B/1) is
not actuated, the machine is disengaged and the
engine continues running.
Operating position:
For operation, press
down the safety lever (B/1). This establishes a
non-
positive connection between engine and
gearbox.
•
The safety circuit must be operated in two
steps:
1) Press the locking strap (unlatch)
2) Press the safety lever down.
With activated wheel drive / tilling drive,
the wheels / tilling tools start rotating imme-
d
iately. Consequently, press down the safety
lever only when the drives are at O position
and/or are disengaged at the manual clutch
lever.
Never tamper with the safety circuit.
Never tie up the safety lever.
The safety lever is used as an e
mergency
off switch:
Release the lever in a dangerous
situation. It swings automatically to "STOP"
position!