22
V
9.2 MICROMETRICALLY
ADJUSTABLE STRAP
RETENTION SYSTEM
The micrometrically adjustable strap retention
system needs the strap to be adjusted for length
before being fastened.
The following instructions and diagrams show you
how to adjust the length of the strap by increasing
or decreasing the amount which passes through
the ring
1
until the helmet fits perfectly with the
strap fastened.
To fasten the helmet, insert the pronged section
into the buckle
2
and press it firmly home
3
until you feel the strap pressing against your jaw.
The micrometric adjustment system allows even
more precise "calibration" of the strap for improved
comfort thanks to the number of setting available.
(We recommend however that you insert the strap
as far into the buckle as possible). Make sure
that the helmet fits your head perfectly (also see
“Choosing the right helmet” in the “Safety Warning”
booklet).
To unfasten the helmet, lift the red lever with the
help of the fabric tape
4
then slide the strap out
of the buckle
5
.
1
4
5
3
2
To Next Page
Loading...
