AGV K3 - Sun Visor; Operation and Adjustment; Removal and Installation

11
EN
FR
DE
ES
PT
РУ
中文中文
IT
日本語日本語
4 SUN VISOR
Made of scratch-resistant polycarbonate, the sun
visor improves comfort and offers protection from
UV radiation. Transmittance varies between 20%
and 35% depending on approvals. The position can
be adjusted based on the shape of the nose.
The sun visor must only be used during
the day in optimal visibility conditions. It
must never be used at night, at dawn, at
sunset, or when weather conditions do not
allow perfect visibility.
4.1 OPERATION
AND ADJUSTMENT
To lower the sun visor, push the operating slider
A
towards the back of the helmet
1
.
Once lowered, the sun visor can be adjusted by
regulating the last 5 mm of travel.
Do not operate the sun visor without using
the predefined cursor.
4.2 REMOVAL
AND INSTALLATION
Prerequisite: in a seated position, rest the helmet on your
knees. Lower the sun visor.
Grasp the sun visor and push it towards the inside of
the shell until the plastic tab
B
detaches from its
housing
C
as in figure
2
.
Repeat the operations above on the other side
mechanism.
To install the sun visor, repeat the previous
operations in reverse order, taking care to ensure
correct movement.
1
2
A
B C