K65E/K75D/K95D/K95i
1-5
K65E/K75D/K95D/K95i
1-5
1.4.2 Electrical work on the
machine may only be carried out by
a qualified electrician or persons
supervised by a qualified electrician
according to the electrotechnical
regulations.
1.4.3 Only qualified specialists
may carry out work on the trans-
mission mechanism and to the
hydraulic system.
1.4.4 Only personnel with special
experience and the necessary
know-how are permitted to carry
out work on the hydraulic system.
1.5 Safety Information for
Certain Operating Phases
1.5.1 Normal Operation
1.5.1.1 Other persons must not
be transported!
1.5.1.2 Start and drive the
machine from the driver’s seat only!
1.5.1.3 During starting and
switching-off operation observe the
control lamps according to the
operation manual (machine and
engine)!
1.5.1.4 Before commencing
work/driving check brakes, steering,
signal lights and lights for their
functioning!
1.5.1.5 Before moving the
machine always check that the
attachments are safely stowed so
that no accident may occur!
1.4.2 Electrical work on the
machine may only be carried out by
a qualified electrician or persons
supervised by a qualified electrician
according to the electrotechnical
regulations.
1.4.3 Only qualified specialists
may carry out work on the trans-
mission mechanism and to the
hydraulic system.
1.4.4 Only personnel with special
experience and the necessary
know-how are permitted to carry
out work on the hydraulic system.
1.5 Safety Information for
Certain Operating Phases
1.5.1 Normal Operation
1.5.1.1 Other persons must not
be transported!
1.5.1.2 Start and drive the
machine from the driver’s seat only!
1.5.1.3 During starting and
switching-off operation observe the
control lamps according to the
operation manual (machine and
engine)!
1.5.1.4 Before commencing
work/driving check brakes, steering,
signal lights and lights for their
functioning!
1.5.1.5 Before moving the
machine always check that the
attachments are safely stowed so
that no accident may occur!
To Next Page
Loading...