1-18
K65E/K75D/K95D/K95i
1-18
K65E/K75D/K95D/K95i
1.6.5.2 Only carry out welding,
burning and grinding work on the
machine when this is explicitly
approved. Otherwise danger of
fire and explosion!
1.6.5.3 Before carrying out
welding, burning and grinding work
clean the machine and its vicinity
from combustibles and make sure
that the room is adequately
ventilated.
Explosion hazard!
1.7 Transport and towing,
restart
1.7.1
The machine may only be
towed if the brakes and steering
function.
1.7.2 Towing may be carried out
only by means of an adequately
dimensioned towing bar in connec-
tion with towing devices.
1.7.3 When towing drive slowly.
Persons must not remain near the
towing bar.
1.7.4 When the machine is loaded
and transported the necessary
auxiliary equipment must be fitted
to prevent any unintended move-
ment. The tires must be kept clean
of mud, snow and ice so that the
machine can drive on the ramp
without danger of sliding.
1.7.5 Restart the machine strictly
observing the regulations of the
operating manual.
1.6.5.2 Only carry out welding,
burning and grinding work on the
machine when this is explicitly
approved. Otherwise danger of
fire and explosion!
1.6.5.3 Before carrying out
welding, burning and grinding work
clean the machine and its vicinity
from combustibles and make sure
that the room is adequately
ventilated.
Explosion hazard!
1.7 Transport and towing,
restart
1.7.1
The machine may only be
towed if the brakes and steering
function.
1.7.2 Towing may be carried out
only by means of an adequately
dimensioned towing bar in connec-
tion with towing devices.
1.7.3 When towing drive slowly.
Persons must not remain near the
towing bar.
1.7.4 When the machine is loaded
and transported the necessary
auxiliary equipment must be fitted
to prevent any unintended move-
ment. The tires must be kept clean
of mud, snow and ice so that the
machine can drive on the ramp
without danger of sliding.
1.7.5 Restart the machine strictly
observing the regulations of the
operating manual.
To Next Page
Loading...