AHT Kinley XL Operating Instructions

1.1.4 | Semiautomatic defrost AHT Cooling Systems GmbH | en
10 / 16 398051_4_0119
1.1.4 Semiautomatic defrost
Start semi-
automatic defrost:
Press for at least 5 s.
„dfb“ appears briefly. Then
„dEF“ and the symbol is
shown on the display.
After semi-automatic defrost, the unit automatically re-
turns to normal operation.
1.1.5 Switch the door heating on and off
(optional)
Switch on door
heating:
Press for at least 1 s.
The symbol is shown on
the display.
Switch off door
heating:
Press for at least 1 s.
The symbol expires on
the display.
1.1.6 Display and acknowledge alarm
Display alarm
The error code is displayed alternately with the cur-
rent temperature until the fault has been rectified.
Depending on the type of error the control element
and / or the symbols are flashing on the
display.
Depending on the type of error an acoustic alarm is
emitted by a built-in buzzer.
List of error codes:
Error code Meaning
E0
Temperature sensor S1
defective
E1
Temperature sensor S2
defective
E2
Temperature sensor S3
defective
LO Low temperature alarm
HI High temperature alarm
Etc Real time clock fault
EE Elektronic fault
EF Elektronic fault
CON
Disconnection inverter to
controller
Acknowledge alarm
Acknowledge
acoustic alarm:
Press briefly.
Error code can NOT be acknowledged.
The error code is displayed alternately with the current
temperature until the fault is rectified.
For troubleshooting measures in the event of alarm in-
dications see →Faults in operation.

AHT Kinley XL Specifications

General

Brand	AHT
Model	Kinley XL
Category	Commercial Food Equipment
Language	English