Aico Ei3018 - Page 45

45
Mode / Action
Power up
Detecting Fire
Activated
via Interconnect
Pressing Silence
Button on Alarm
detecting fire
x 10mins
Standby
Testing (pressing
and holding
Test button)
Green LED
(Power)
Icon Display
FIRE/CO
(Ei3028 only)
Yellow LED
(Fault)
Red LED
(Alarm)
Alarm Notes
Normal Operation
In Alarm
as per
Table B
as per
Table B
Pressing Silence
Button on Alarm
detecting CO
x 4 min if
< 150ppm
1 Flash
Flashing
Flashing
Flashing
Fire sound
pattern
&
Detecting CO
CO sound
pattern
once per
alarm event
Flashing
Flashing
With the test button held the green LED will flicker/pulse every second
= LED on solid
= LED flashing