a.Drill holes according to the paper
guide inside lock package.
b.Insert the lock latch into the door.
c.Install the square iron stick & outside lock housing
d.install the inside lock housing
a.Insert the lock latch into the door and tighten up with 2pcs screws M4x20.
b.Install the strike plate and fix it with 2pcs self-tapping screws.
:The latch should face to the outside deadbolt.
:2 fixed screws in line should be parallel to the door edge.
:The previous strike plate must be removed
Strike Plate
Lock latch
60-70mm
To Next Page
Loading...