Aim-TTI TG5011A - Page 5

4
Ramp
Frequency Range:
1µHz to 1MHz [1µHz to 500kHz]
Frequency Resolution:
1µHz, 12 digits
Output Level:
10mVp-p to 10Vp−p into 50Ω
Linearity Error:
<0.1% to 30 kHz
Variable Symmetry:
0.0 % to 100.0 %, 0.1% resolution
Pulse
Frequency Range:
500µHz to 12.5MHz [500µHz to 6.25MHz]
Frequency Resolution:
1µHz, 14 digits
Output Level:
10mVp-p to 10Vp−p into 50Ω
Overshoot:
<5%
Jitter:
300ps + 0.01% of period, typical
Rise/Fall Times: Rise and Fall times can be independently varied or can be varied
together simultaneously.
Range:
<8ns to 40µs [<13ns to 40
µ
s]
Resolution: 0.1ns (for rise and fall time ≤100ns)
1ns (for rise and fall time >100ns and ≤2µs)
10ns (for rise and fall time >2µs and ≤40µs)
Width Range: 20ns to 2000s (20ns min for period ≤40s; 200 ns min for period
>40s and ≤400s; 2µs min for period >400s)
Width Resolution: 10ns (for period ≤40s)
100ns (for period >40s and ≤400s)
1µs (for period >400s)
Delay Range:
0ns to 2000s
Delay Resolution: 10ns (for period ≤40s)
100ns (for period >40s and ≤400s)
1µs (for period >400s)
Arbitrary
In built arbitrary waveforms (Sinc, Exponential Rise, Logarithmic Rise and DC). Up to 4 user-
defined waveforms may be stored in non-volatile memory. Waveforms can be defined by
downloading of waveform data via remote interfaces or from the instrument’s front panel.
Waveform Memory Size: 4 waveforms – 4 waveforms of maximum size 65536 points or
3 waveforms – 1 waveform of maximum size 131072 points and 2
waveforms of maximum size 65536 points or
2 waveforms – 2 waveforms of maximum size 131072 points.
Minimum waveform size is 2 points.
Vertical Resolution:
14 bits
Frequency Range:
1µHz to 10MHz [1µHz to 6MHz]
Frequency Resolution:
1µHz, 14 digits
Output Level:
10mVp-p to 10Vpp into 50Ω
Sampling rate:
125MS/s