Power connections must remain tight to avoid excessive heating from a loose
connection.
Use properly sized conductors and circuit interrupters.
WARNING: A battery can present a risk of electrical shock or burn from
large amounts of short-circuit current, fire, or explosion from vented gases. Observe
proper precautions.
CAUTION: When replacing batteries, use properly specified sizes, type
and rating based on application and system design.
About this Manual
This
manual provides detailed installation and usage instructions for the
MPPT solar charge controller. Only qualified electricians and technicians
who are familiar with solar system design and wiring practices should install
the MPPT controller. The usage information in this manual is intended for the
system owner/operator.
To Next Page
Loading...
Need help?
General
