1. Important safety instructions
Save these instructions
This manual contains important safety, installation and operating instructions for the
MPPT solar controller.
The following symbols are used throughout this manual to indicate potentially
dangerous conditions or mark important safety instructions.
WARNING:
Indicates a potentially dangerous condition. Use extreme caution when performing this
task.
CAUTION:
Indicates a critical procedure for safe and proper operation of the controller.
NOTE:
Indicates a procedure or function that is important for the safe and proper operation of
the controller.
Safety Information
Read all the instructions and cautions in the manual before beginning installation.
There are no user serviceable parts inside the MPPT charger. Do not disassemble
or attempt to repair the controller.
Disconnect all sources of power to the controller before installing or adjusting the
controller setting.
Mount the controller indoors. Prevent exposure to the elements and do not
allow water to enter the controller.
Install the controller in a location that prevents casual contact. The controller can
become very hot during operation.
Use insulated tools when working with batteries.
Avoid wearing jewelry during installation.
The battery bank must be comprised of batteries of same type, make and age.
Do not smoke near the battery bank.