24
Before Using
microSD Cards (IX-EA, IX-SSA(-*), IX-DV and IX-
DVF(-*))
2
Inserting/Removing microSD Cards
Inserting a microSD card (IX-EA)
1. Remove the panel.
2. Remove the main unit from the
installation stand (wall).
3. Remove the terminal cover on the
rear of the main unit.
(1) Loosen the two terminal cover installation
screws.
(2) Remove the terminal cover from the main
unit.
4. Insert a microSD card into the
main unit.
• Push it in until you hear it click into place.
• The status indicator will flash orange while
mounting the microSD card.
5. Return the terminal cover, main
unit, and panel to their original
positions.
Inserting a microSD card (except IX-
EA)
1. Remove the front cover.
• For IX-DV
<Bottom surface>
Flathead screwdriver
Special screwdriver (included)
Main unit
Loosen
Terminal cover
Important
• Calls and other operations cannot be performed while the
microSD card is being mounted.
• Be sure to reattach the terminal cover. Otherwise,
condensation or water could enter the device, causing a
malfunction.
microSD card
<Bottom surface>
Loosen
Special screwdriver
(included)
To Next Page
Loading...
