8
Before Using
Part Names
2
Part Names
Video Door Station IX-EA
*1 Pressing the [Call] button turns the light ON when in a dark location, such as at night. The light turns OFF once the call has
ended.
It also lights ON when being monitored by the Master Station.
There may be cases where it is configured to not light ON.
*2 The angle of the camera can be adjusted up and down.
*3 This is for use by service personnel only. Do not press it.
Call indicator (green)
Camera
Microphone
Night LED
illumination
*1
Speaker
microSD card slot*
(→page 23)
Communication indicator
Door release indicator
Call button
Status indicator (orange/
blue)
The ring around the button
will illuminate
Camera angle adjustment
lever
*2
Terminal cover
Reset button*
*3
microSD card release button*
(→page 23)
MAC address
*Found by removing terminal
cover.
To Next Page
Loading...
