Aiphone IX-EA - Viewing Video from IX-EA, IX-DV or IX-DVF(-*) with 3 Rd Party Products (ONVIF)

90
Settings and Adjustments
Station programming
4
Viewing video from IX-EA, IX-DV or IX-DVF(-*)
with 3rd party products (ONVIF)
IX-EA, IX-DV and IX-DVF(-*) are compatible with the "ONVIF profile S" ONVIF interface standard.
Video and audio of IX-EA, IX-DV and IX-DVF(-*) can be monitored on a 3rd party product.
■ Configuring IX-EA, IX-DV and IX-DVF(-*) video for 3rd party integration
1. Select "Enable" for “Second Video Encoder (→page 52)”.
2. Configure video and audio settings.
• Configure video in “Video Encoder 2 (→page 52)” (the Video 2 RTP port number is an administrator setting),
and audio in "Audio 2 RTP Start Port (administrator setting)" and "Audio 2 RTP End Port (administrator
setting)."
3. Register IX-EA, IX-DV or IX-DVF(-*) with a 3rd party product.
• Enter the following as necessary.
– ONVIF ID: Configure in “ONVIF ID (for IX-EA, IX-DV and IX-DVF(-*)) (→page 48)”
– ONVIF Password: Configure in “ONVIF Password (for IX-EA, IX-DV and IX-DVF(-*)) (→page 48)”
– ONVIF port number: 10080
– RTSP ID: Configure in “RTSP ID (→page 48)”
– RTSP Password: Configure in “RTSP Password (→page 48)”
– RTSP port number: 554
• For how to register, refer to the instruction manual of the 3rd party product.
Important
• Video from IX-EA, IX-DV and IX-DVF(-*) cameras cannot be viewed simultaneously by more than two 3rd party products.
• Audio will not be distributed if "Audio Codec (administrator setting)" is set to "G.722."
• The "ONVIF ID" and "ONVIF Password" may be changed by the 3rd party product.