Aiphone IX-EA - Page 52

52
Settings and Adjustments
Station programming
4
■ Video Encoder 2
Set when transmitting video using ONVIF.
To view video of IX-EA, IX-DV or IX-DVF(-*) with a 3rd party product, refer to
“Viewing video from IX-EA, IX-DV or IX-
DVF(-*) with 3rd party products (ONVIF) (→page 90)”.
*1 Indicates a required field. Use the default values, unless a change is necessary.
Important
• Settings may need to be changed when connected to 3rd party products. For details, refer to the manual of those products.
Note
• The frame rate or bit rate may be lower than the set value depending on the video being sent, the number of recipient stations,
and the network environment.
Entry Description Settings Default values
Second Video
Encoder
Select Enable / Disable for Second Video
Encoder.
Set to "Enable" to send the video using
ONVIF.
• Enable
• Disable
Enable
Video Codec Select the Video Codec of Video Encoder 2. • H.264 / AVC
• Motion-JPEG
H.264 / AVC
Resolution Select the video resolution of Video Encoder
2.
• 320×240 (QVGA)
• 640×480 (VGA)
• 800x480(WVGA)
• 1280x720(HD)
• 1280x960(SXVGA)
1280x720(HD)
Frame Rate [fps] Set the Frame Rate [fps] of Video Encoder
2.
1, 2, 3, 5, 7.5, 10, 15, 20, 30 10 fps
Select Profile [H.264 /
AVC]
Select the H.264/AVC Profile of Video
Encoder 2.
• Baseline
• Main
• High
Main
I-picture interval
[H.264/AVC]
*1
Set the interval to send H.264/AVC I-picture
of Video Encoder 2.
1 - 100 10
Bit rate [kbps] [H.264 /
AVC]
Set the H.264/AVC Bit Rate of Video
Encoder 2.
32, 64, 128, 256, 384, 512,
768, 1024, 2048, 4096, 8192
2048 kbps
Select Quality [Motion-
JPEG]
Select the Quality of Motion-JPEG of Video
Encoder 2.
1 (low) to 10 (high) 6