37
How to use
Paging
3
3. Speak with the other party
4. When the communication ends,
press the [Call] button.
• The communication indicator will turn OFF.
Note
• If an outgoing call is made during paging, paging may be
canceled when the outgoing call is placed, depending on
the priority.
• The paging pretone may not sound, depending on the
settings.
• Depending on the settings, the paging pretone and the
paging audio may play from separately installed speakers.
• A contact input trigger may be used to answer, depending
on the settings.
• A call start notification tone or message may play when the
call starts, depending on the settings.
• If the call duration that was previously set on this station
elapses, the call will automatically end. A notification tone
will play approximately 10 seconds prior to the call ending.
The notification tone may not play, depending on the
settings.
• If a page with a higher priority is received from another
station during a call or page, the call or page will be
interrupted and the station will switch to the page with the
higher priority.
• Depending on the IX-MV7-* settings, it may be impossible
to answer an urgent page.
• If a paging pretone with a long duration is set, the initial
paging tone may be cut short.
To Next Page
Loading...
