55
Settings and Adjustments
Station programming
4
2. Select the audio file, click [Open].
• Information of the selected audio file will be displayed.
– Name: Shows the file name of the audio file. Up to 24 alphanumeric characters will be displayed.
The name will be shown as the setting value when configuring the ringtone etc.
If the file name of the audio file exceeds the character limit above, it will partially be shown.
A different name from the original file name can be used.
– Browse for .wav file: The audio file reference destination is shown.
3. Click [Update].
How to delete
1. Check the [Delete] box of the audio file to delete.
2. Click [Update].
To Next Page
Loading...
