Aiphone IX-EA - Page 84

84
Settings and Adjustments
Station programming
4
Auto Answer Tone Ringtone when receiving an individual call.
“Auto Answer (→page 63)” set to "ON."
• None
• Call Pattern 1
• Call Pattern 2
• Call Pattern 3
• Call Pattern 4
• Call Pattern 5
• Call Pattern 6
• Call Pattern 7 (for IX-EA)
• Tremolo Sound
• Busy Response Tone
• On Hold
• Operation Sound
• Error
• Pre Tone 1
• Pre Tone 2
• Pre Tone 3
• Communication End
Pretone
• Call Queue Notification
• Waiting Reply Tone
• Select a sound that is
registered in
“Custom
Sound Registry
(→page 54)”.
Pre Tone 1
Key Received Configure the tone to send to the destination
station when the door release key entered
using a keypad on the destination station
(station performing a door release
operation) matches the authentication key of
this station. (station connected to the
electrical lock) The tone will be heard on the
other station.
• None
• Call Pattern 1
• Call Pattern 2
• Call Pattern 3
• Call Pattern 4
• Call Pattern 5
• Call Pattern 6
• Call Pattern 7 (for IX-EA)
• Tremolo Sound
• Busy Response Tone
• On Hold
• Operation Sound
• Error
• Pre Tone 1
• Pre Tone 2
• Pre Tone 3
• Communication End
Pretone
• Call Queue Notification
• Waiting Reply Tone
• Select a sound that is
registered in
“Custom
Sound Registry
(→page 54)”.
None
Entry Description Settings Default values