EasyManua.ls Logo

Air Lift LoadLifter 5000 Series User Manual

Air Lift LoadLifter 5000 Series
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Kits 57204 | 88204 | 89204
57211 | 88211
For maximum effectiveness and safety, please read these instructions
completely before proceeding with installation.
SERIES
Installation
Guide
TM
MN-1045 • (021810) • ECR 9155
Failure to read these instructions can result in an incorrect installation.
Chevrolet Silverado/GMC Sierra

Other manuals for Air Lift LoadLifter 5000 Series

Question and Answer IconNeed help?

Do you have a question about the Air Lift LoadLifter 5000 Series and is the answer not in the manual?

Air Lift LoadLifter 5000 Series Specifications

General IconGeneral
Adjustable Air Pressure5-100 PSI
Air Spring TypeDouble Convoluted
WarrantyLimited Lifetime Warranty
Load Capacity5, 000 lbs
ApplicationTowing and Hauling
InstallationBolt-on
PurposeTo level vehicle and improve ride quality
Minimum Height5 inches
Included ComponentsAir springs

Summary

Identifying Kit Differences

Kit Type Descriptions

Provides descriptions for Standard, Ultimate, and Ultimate Plus LoadLifter 5000 kits.

Hardware and Tools Lists

Common Parts Included

Lists common components provided across all LoadLifter 5000 kits.

Unique Parts by Kit

Details specific parts included in each LoadLifter 5000 kit variant.

Required Tools for Installation

Lists the necessary tools for performing the installation of the air springs.

Introduction to LoadLifter 5000 Series

Notation Explanation for Safety

Explains hazard notations (Danger, Warning, Caution) used in the manual.

Installing the LoadLifter 5000 Series System

Getting Started with Installation

Initial steps for preparing the vehicle for air spring installation.

Emergency Brake Cable Modifications

Details modifications required for the emergency brake cable for specific kits.

Building Air Spring Assemblies

Instructions for assembling the air spring components before mounting.

Installing Air Spring Assemblies

Steps for mounting the assembled air springs onto the vehicle frame and axle.

Installing the Air Lines

Guides the routing and connection of air lines from the springs to the valves.

Finished Installation

Final checks and completion steps after air spring installation.

Installation Checklist

Clearance and Leak Tests

Checks for component clearance and air leaks before road testing.

Heat and Fastener Tests

Ensures proper heat clearance and verifies all fasteners are torqued.

Maintenance and Use Guidelines

Pressure Monitoring and Leak Detection

Recommendations for checking air pressure and detecting leaks.

Limited Warranty and Return Policy

Related product manuals