Air Lift WirelessAIR 73000EZ User Manual

73000EZ
Kit Number
TOOLS LIST
Description ......................................................... Qty
Power drill ..................................................................... 1
3/8", 1/4" Drill bit .................................................... 1 ea.
3/8", 1/2", 5/16", 9/16" Sockets and ratchet ......... 1 ea.
Wire stripping/crimping tool .........................................1
Sharp razor knife .......................................................... 1
Manifold
Compressor
*Smart phone not included
MN-1159 • (012109) • ERN 9886
Introduction
WirelessAIR™ App only, No Controller with EZ Mount™ combines a manifold and
compressor into a single, easy-to-install unit, along with wiring harness and accessories
needed to connect to vehicle power and air springs (purchased separately).
It is important to read and understand the entire installation guide before beginning
installation or performing any maintenance, service or repair. The information here
includes a hardware list, step-by-step installation information and safety information.
USING THE SYSTEM
Refer to the WirelessAIR™ App only, No Controller with EZ Mount™ User Guide
included with this kit to learn how to operate the system.
WARNING
DANGER
CAUTION
*
NOTATION EXPLANATION
Hazard notations highlight information that must be observed to help minimize risk of
personal injury or possible improper installation, which may render the vehicle unsafe.
INDICATES IMMEDIATE HAZARDS WHICH WILL RESULT IN SEVERE PERSONAL
INJURY OR DEATH.
INDICATES HAZARDS OR UNSAFE PRACTICES WHICH COULD RESULT IN SEVERE
PERSONAL INJURY OR DEATH.
INDICATES HAZARDS OR UNSAFE PRACTICES WHICH COULD RESULT IN DAMAGE
TO THE MACHINE OR MINOR PERSONAL INJURY.

Air Lift WirelessAIR 73000EZ Specifications

General

Brand	Air Lift
Model	WirelessAIR 73000EZ
Category	Automobile Accessories
Language	English

Summary

Introduction and System Overview

Using the System

Guide on operating the WirelessAIR App only, No Controller with EZ Mount system.

Notation Explanation

Explanation of hazard notations (DANGER, WARNING, CAUTION) for safety.

Tools List

List of necessary tools for installation and maintenance procedures.

Hardware and Component Layout

Hardware List

Detailed list of hardware components included in the kit.

Suggested Component Layout

Recommendations for mounting EZ Mount and routing air lines/wiring.

Installation and Mounting

Wiring to the Battery and Ignition Source Connection

Guidance on connecting the system to the vehicle's battery and ignition.

EZ Mount Component Details

Description of the EZ Mount (Manifold & Compressor) unit.

Unacceptable Mounting Orientations

Illustrates incorrect ways to mount the EZ Mount unit.

Installing WirelessAir EZ Mount

Instructions for mounting the EZ Mount unit using various methods.

Remote Filter Installation

Steps for installing the remote air inlet filter.

Air Line and Wiring Connections

Steps for routing and connecting air lines and the wiring harness.

Cutting the Air Lines

Proper technique for making clean cuts on air lines for optimal fitting.

Technical Support