Air Lift WirelessAIR 74100EZ User Manual

EZ Mount & Upgrade Tank System
74100EZ &
74100
Kit Number
Installation Guide
TOOLS LIST
Description ................................................. Qty
Power drill .............................................................1
1/4", 3/8" Drill bits ..........................................1 ea.
Grinder ..................................................................1
Standard wrench set ............................................1
3/8", 1/2", 5/16", 9/16" Sockets & ratchet .....1 ea.
Description ................................................. Qty
3/32 Hex key ........................................................1
Wire stripping/crimping tool .................................1
Sharp razor knife ..................................................1
Lighter or torch .....................................................1
Teflon tape ............................................................1
MN-1183 • (012304) • ERN 9473
Introduction
WirelessAIR™ Tank Systems combine a manifold and compressor into a tank system,
along with a wiring harness and accessories needed to connect to vehicle power and air
springs (purchased separately). The upgrade system allows you to upgrade your existing
system into a tank system with all the appropriate integration pieces.
WARNING
DANGER
CAUTION
IMPORTANT: PLEASE READ BEFORE INSTALLING
NOTATION EXPLANATION
Hazard notations highlight information that must be observed to help minimize risk of
personal injury or possible improper installation, which may render the vehicle unsafe.
INDICATES IMMEDIATE HAZARDS WHICH WILL RESULT IN SEVERE PERSONAL INJURY
OR DEATH.
INDICATES HAZARDS OR UNSAFE PRACTICES WHICH COULD RESULT IN SEVERE
PERSONAL INJURY OR DEATH.
INDICATES HAZARDS OR UNSAFE PRACTICES WHICH COULD RESULT IN DAMAGE TO
THE MACHINE OR MINOR PERSONAL INJURY.
IT IS IMPORTANT TO READ AND UNDERSTAND THE ENTIRE INSTALLATION GUIDE
BEFORE BEGINNING INSTALLATION OR PERFORMING ANY MAINTENANCE,
SERVICE OR REPAIR. THE INFORMATION HERE INCLUDES A HARDWARE LIST,
STEP-BY-STEP INSTALLATION INFORMATION AND SAFETY INFORMATION.
USING THE SYSTEM
Refer to the WirelessAIR™ User Guide included with this kit
to learn how to operate the system, connect the wireless
controller and connect your mobile device to the system.
1
WirelessAir User Guide
User Guide

Air Lift WirelessAIR 74100EZ Specifications

General

Voltage	12 volts
Compatibility	Universal
Control Type	Wireless
Features	Wireless control
Power Source	12V DC
Display	Digital

Summary

Introduction to WirelessAIR Tank Systems

Important Safety and Notation Guidelines

Critical safety warnings and notation explanations required before installation.

System Usage Overview

Instructions for operating the WirelessAIR system and connecting devices.

Installation Tools Required

List of necessary tools for performing the installation.

WirelessAIR Hardware Component Lists

Installation Precautions and Component Layout

Key Installation Precautions

Critical reading and safety guidelines before commencing installation.

Suggested Component Placement

Guidance on optimal placement of system components for performance and installation.

EZ Mount Bracket Preparation Steps

Remote Assembly of Filter, Pressure Switch, and Solenoid

Air Tank Preparation and Fitting Installation

Compressor and Remote Air Filter Installation

Compressor Installation Guide

Guidance on mounting the compressor and its air filter.

Remote Air Filter Installation Guide

Steps for installing the air filter in a remote location.

Mounting the Air Tank and Filter Bracket

Tank Installation onto Vehicle Frame

Instructions for securely mounting the air tank to the vehicle frame.

Filter/Switch/Solenoid Bracket Mounting

Steps for mounting the bracket for the filter, pressure switch, and solenoid.

Wireless Air EZ Mount Installation

Wiring Connections on Frame Rail

Wiring Connections in Engine Compartment

WirelessAIR System Installation Diagram

Remote Mounting the Fill Port

Air Line Handling and System Pairing

Proper Air Line Cutting Techniques

Proper techniques for cutting air lines to ensure a good seal.

Air Line Installation and Routing

Guidance on routing and connecting air lines according to the installation diagram.

Mobile App and Controller Pairing

Steps for pairing the WirelessAIR system with a mobile device or controller.

Drilling Template for Air Compressor Mounting

Drilling Template for EZ Mount Assembly Mounting

Drilling Template for Air Tank Mounting

Product Warranty, Parts, and Contact Information

Limited Warranty and Return Policy Details

Information regarding the product's warranty period and return procedures.

Replacement Part Acquisition

Guidance on how to obtain replacement parts for the system.

Air Lift Company Contact Information

Details for contacting Air Lift Company for support and inquiries.

Customer Support and Assistance