Need help?Do you have a question about the AirLive AC.TOP and is the answer not in the manual?
Explains the different operating modes available for the AC.TOP.
Describes the function and usage of the AC.TOP in Access Point mode.
Explains how to use the AC.TOP to extend wireless network range.
Details the physical installation process, including mounting methods.
Provides step-by-step instructions for mounting the AC.TOP onto a ceiling.
Provides instructions for mounting the AC.TOP using a T-Rail bracket.
Explains the two methods for powering the AC.TOP device.
Describes the meaning and status of the LEDs on the AC.TOP.
Explains how to access and navigate the AC.TOP's web management interface.
Describes the steps to access the AC.TOP's web interface via a browser.
Guides users through the initial setup process using the wizard.
Covers recommended initial settings after the first login.
Details how to change the default IP address for network compatibility.
Explains how to set the device's time and date for accurate logging.
Guides users on changing the default administrator password for security.
Explains the different operating modes available for the AC.TOP.
Describes general wireless functions applicable across different modes.
Details the AP and WDS Repeater modes for wireless operation.
Explains the available 2.4GHz and 5GHz band options for WLAN transmission.
Defines the SSID as the network name for identifying a wireless network.
Allows creation of multiple virtual APs with distinct SSIDs on each band.
Explains radio frequency channels and their availability by region.
Configures encryption methods like WEP, WPA, WPA2 for data security.
Details WPA security protocols including TKIP, AES, and mixed modes.
Filters wireless access based on MAC addresses, allowing or denying specific devices.
Configures network settings for the LAN interface, including IP address and DHCP.
Enables/disables the DHCP server, defines client IP pool and lease time.
Enables and manages password protection for accessing the device.
Instructions for updating the AC.TOP's firmware for new features or fixes.
Guides on restoring default settings if password or IP is forgotten.
Troubleshooting steps for when the device is inaccessible via web interface.
Solutions for issues preventing connection to the AC.TOP.
Solutions for login issues on the web management interface.
Explains the different operating modes available for the AC.TOP.
Describes the function and usage of the AC.TOP in Access Point mode.
Explains how to use the AC.TOP to extend wireless network range.
Details the physical installation process, including mounting methods.
Provides step-by-step instructions for mounting the AC.TOP onto a ceiling.
Provides instructions for mounting the AC.TOP using a T-Rail bracket.
Explains the two methods for powering the AC.TOP device.
Describes the meaning and status of the LEDs on the AC.TOP.
Explains how to access and navigate the AC.TOP's web management interface.
Describes the steps to access the AC.TOP's web interface via a browser.
Guides users through the initial setup process using the wizard.
Covers recommended initial settings after the first login.
Details how to change the default IP address for network compatibility.
Explains how to set the device's time and date for accurate logging.
Guides users on changing the default administrator password for security.
Explains the different operating modes available for the AC.TOP.
Describes general wireless functions applicable across different modes.
Details the AP and WDS Repeater modes for wireless operation.
Explains the available 2.4GHz and 5GHz band options for WLAN transmission.
Defines the SSID as the network name for identifying a wireless network.
Allows creation of multiple virtual APs with distinct SSIDs on each band.
Explains radio frequency channels and their availability by region.
Configures encryption methods like WEP, WPA, WPA2 for data security.
Details WPA security protocols including TKIP, AES, and mixed modes.
Filters wireless access based on MAC addresses, allowing or denying specific devices.
Configures network settings for the LAN interface, including IP address and DHCP.
Enables/disables the DHCP server, defines client IP pool and lease time.
Enables and manages password protection for accessing the device.
Instructions for updating the AC.TOP's firmware for new features or fixes.
Guides on restoring default settings if password or IP is forgotten.
Troubleshooting steps for when the device is inaccessible via web interface.
Solutions for issues preventing connection to the AC.TOP.
Solutions for login issues on the web management interface.
General| Wireless Standards | IEEE 802.11b/g/n |
|---|---|
| Frequency Bands | 2.4 GHz |
| Antenna Type | Internal |
| Operating Modes | Access Point, Repeater, WDS, Client |
| Wireless Security | WEP, WPA, WPA2 |
| Power Supply | 12V DC |
To Next Page
