EasyManua.ls Logo

AirLive WL-5460AP - User Manual

AirLive WL-5460AP
81 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
W
L-5460AP
54Mbps Multi-Function
Wireless AP
User’s Manual

Other manuals for AirLive WL-5460AP

Question and Answer IconNeed help?

Do you have a question about the AirLive WL-5460AP and is the answer not in the manual?

Summary

Declaration and Regulatory Information

Declaration of Conformity

Official statement of product compliance with EU directives and standards.

Operation Modes

Wireless Settings

Access Point Mode Settings

Configuration options for the Access Point mode, including SSID and band.

Client Mode Settings

Configuration settings for the device when operating in Client mode.

Bridge Mode Settings

Configuration parameters for the Bridge mode, including WDS settings.

WDS Repeater Mode Settings

Settings specific to configuring the device as a WDS Repeater.

Universal Repeater Mode Settings

Configuration options for the Universal Repeater mode.

WISP Mode Settings

Settings for configuring the device in WISP (Client Router) mode.

WISP + Universal Repeater Mode Settings

Configuration for the combined WISP and Universal Repeater mode.

Gateway Mode Settings

Settings for the Gateway (AP + Router) mode, including WAN port configuration.

Wireless Security Settings

Configuration for WEP, WPA/WPA2-PSK, and 802.1X security.

System Management

System Recovery

Recovery Procedure

Steps to restore the device after a firmware crash or failure.

Summary

Declaration and Regulatory Information

Declaration of Conformity

Official statement of product compliance with EU directives and standards.

Operation Modes

Wireless Settings

Access Point Mode Settings

Configuration options for the Access Point mode, including SSID and band.

Client Mode Settings

Configuration settings for the device when operating in Client mode.

Bridge Mode Settings

Configuration parameters for the Bridge mode, including WDS settings.

WDS Repeater Mode Settings

Settings specific to configuring the device as a WDS Repeater.

Universal Repeater Mode Settings

Configuration options for the Universal Repeater mode.

WISP Mode Settings

Settings for configuring the device in WISP (Client Router) mode.

WISP + Universal Repeater Mode Settings

Configuration for the combined WISP and Universal Repeater mode.

Gateway Mode Settings

Settings for the Gateway (AP + Router) mode, including WAN port configuration.

Wireless Security Settings

Configuration for WEP, WPA/WPA2-PSK, and 802.1X security.

System Management

System Recovery

Recovery Procedure

Steps to restore the device after a firmware crash or failure.

AirLive WL-5460AP Specifications

General IconGeneral
Modulation16-QAM, 64-QAM, BPSK, DBPSK, DQPSK, QPSK
Channels quantity13 channels
Cabling technology10/100Base-T(X)
Ethernet LAN data rates10, 100 Mbit/s
Maximum data transfer rate54 Mbit/s
Power LEDYes
Frequency range2.412GHz - 2.472GHz MHz
Networking featuresEthernet, Fast Ethernet
Compliance industry standardsIEEE 802.3, IEEE 802.3u, IEEE 802.11b, IEEE 802.11g, IEEE 802.1x
Supported data transfer rates54, 48, 36, 24, 18, 11, 5.5, 2, 1Mbps
Antenna featuresDipole antenna
Antenna connector typeRP-SMA
Antenna gain level (max)2 dBi
InternalNo
LED indicatorsLAN, Link, Power, Status, WLAN
Ethernet LAN (RJ-45) ports2
Security algorithms128-bit WEP, 64-bit WEP, 802.1x RADIUS, EAP-TLS, TKIP, WDS, WPA, WPA2
Storage temperature (T-T)-20 - 65 °C
Operating temperature (T-T)0 - 60 °C
Storage relative humidity (H-H)0 - 95 %
Operating relative humidity (H-H)20 - 80 %
Output power description20dBm
Flash memory2 MB
Internal memory16 MB
Internal memory typeDDR
Supported network protocolsDHCP, PPTP, L2TP, PPPoE ISP
Weight and Dimensions IconWeight and Dimensions
Weight900 g
Dimensions (WxDxH)100 x 135 x 26 mm

Related product manuals