Need help?Do you have a question about the AirLive WLA-5200AP and is the answer not in the manual?
Instructions for connecting the Access Point to the network via Ethernet.
Steps to power on the Access Point using the AC adapter.
Ensures the PC has a wireless network adapter installed for configuration.
Steps to access the device's web-based configuration interface.
Configuration parameters specific to the Access Point mode.
Configures WEP encryption levels and keys for wireless security.
Sets up WPA/WPA2 authentication with PSK and encryption methods.
Configures WEP encryption for bridge and repeater modes.
Sets up WPA/WPA2 authentication for bridge and repeater modes.
Sets up the Wide Area Network connection type (Static IP, DHCP, PPPoE, etc.).
Configures IP address, subnet mask, and DHCP for the local network.
Configures network addressing parameters for the local interface.
Configures Domain Name Service and DHCP server/client functions.
Instructions for updating the device's firmware.
Saves and loads current device configurations.
Configures device password and administrative user account for security.
Instructions for connecting the Access Point to the network via Ethernet.
Steps to power on the Access Point using the AC adapter.
Ensures the PC has a wireless network adapter installed for configuration.
Steps to access the device's web-based configuration interface.
Configuration parameters specific to the Access Point mode.
Configures WEP encryption levels and keys for wireless security.
Sets up WPA/WPA2 authentication with PSK and encryption methods.
Configures WEP encryption for bridge and repeater modes.
Sets up WPA/WPA2 authentication for bridge and repeater modes.
Sets up the Wide Area Network connection type (Static IP, DHCP, PPPoE, etc.).
Configures IP address, subnet mask, and DHCP for the local network.
Configures network addressing parameters for the local interface.
Configures Domain Name Service and DHCP server/client functions.
Instructions for updating the device's firmware.
Saves and loads current device configurations.
Configures device password and administrative user account for security.
General| Wireless Standards | IEEE 802.11b/g |
|---|---|
| Frequency Band | 2.4 GHz |
| Maximum Data Rate | 54 Mbps |
| Ethernet Ports | 1 x 10/100 Mbps |
| Antenna Gain | 2 dBi |
| Security | WEP, WPA, WPA2 |
| Power over Ethernet (PoE) | Yes |
| Power Supply | 12V DC, 1A |
| Antenna Type | Detachable |
| Operating Modes | Access Point, Repeater, WDS |
To Next Page
