Introduction
Thank-you and congratulations for purchasing a high quality Airmac belt-drive, reciprocating air
compressor set. It has been designed and manufactured to provide many years of safe and reliable
service if installed, operated and maintained in accordance with these instructions.
Please read and understand this manual before operating the compressor. Failure to do so could
result in death, severe injury or substantial property damage.
If after reading this manual you still have any questions or concerns about your compressor, please
contact your local authorised Airmac dealer or Glenco Air & Power Pty Ltd before operating the unit.
This manual should be considered a permanent part of the compressor and should remain with it if
resold.
Disclaimers
All information, illustrations and specifications in this manual are based on the latest information
available at the time of publishing. The illustrations are intended as representative reference views
only. Due to our policy of continuous product improvement, we may modify information, illustrations
or specifications to explain or exemplify a product, service or maintenance improvement.
We reserve the right to make any change at any time without notice. Your compressor may differ
slightly from the models pictured, including optional accessories.
All Rights Reserved
No part of this publication may be reproduced or used in any form by any means – graphic, electronic
or mechanical, including photocopying, recording, taping or information storage and retrieval
systems – without the written permission of Glenco Air & Power Pty Ltd.
To Next Page
Loading...