Airmega 300 - Installation; Setting Up the Product


 

Before using the product, you must remove the plastic wrapping of the inserted Max2 filters on both sides.
03 INSTALLATION
CAUTION
Make sure that the power cord is unplugged before opening the covers.
1


Covers ▶ Pre-filters ▶ Max2 filters
FRONT/전면/前
FRONT/전면/前
2


Discard the plastic wrapping for Max2 filters.
CAUTION
•
When removing the plastic wrapping from
the filters, be careful not to damage the
surface of filters.
•
Do not allow children to play with the
plastic wrapping.
3



Max2 filters ▶ Pre-filters ▶ Covers
NOTE
•
Place the Max2 filters into the filter case
with the green side facing the product.
Reversed placement may affect the filter
lifetime.
•
The product will not turn on if the right and
left covers are installed incorrectly.
1
2
Max2 filter Pre-filter Cover
1
2
Max2 filter Pre-filter Cover