AirSep FreeStyle - Recommended Tools for Service; Tools for FreeStyle Service and Maintenance

8-1
A
irSep Corp.
—
FreeStyle Service Manual
8.0 Recommended Tools
8.1 Tools for FreeStyle Service and M ain t enanc e
In additional to a pressure test gauge, the following tools are generally readily
available for purchase in your local area, and can assist you in servicing and
maintaining the FreeStyle unit.
Figure 8.1a
.25-inch hexnut scr
ewdr iv er
and Phillips-head scr ewdr iv er
Figure 8.1b
5/32-inch Allen-head dr iv er
Figure 8.1c
0-50 lb torque dr iv er
or fixed 15 lb torque
dr iv er
Figure 8.1d
needle nose pliers and side
cutt ers
Figure 8.2
Pressure test gauge
Available from AirSep:
Part No. K1036-1 --Pressure T est Kit (gauge and c onnec -
tor) and KI340-1 (adapt er)
Figure 8.1e
tie-wrap gun