Need help?Do you have a question about the AIRTRONICS MT-4 and is the answer not in the manual?
General| Brand | AIRTRONICS |
|---|---|
| Model | MT-4 |
| Category | Remote Control |
| Language | English |
Provides essential safety guidelines for operating the radio control system and handling equipment.
Details FCC compliance, interference, and corrective measures for the device.
Outlines RF exposure guidelines and compliance for the transmitter.
Advises on potential interference and best practices for the 2.4GHz frequency band.
Details important handling and operational guidelines for the transmitter.
Provides crucial advice on handling and installing the receiver and its antenna.
Lists the key features and advanced programming capabilities of the radio control system.
Provides detailed technical specifications for the transmitter and receiver units.
Recommends compatible Airtronics servos for optimal performance with the MT-4 system.
Illustrates and labels the various external components and controls of the transmitter.
Further illustrates and labels the top and side views of the transmitter controls.
Illustrates and labels the components and connections of the 92010 (RX-461) receiver.
Provides detailed descriptions of each transmitter and receiver component and its function.
Continues detailed descriptions of transmitter controls and introduces safety alarms.
Explains transmitter safety alarms and LED indicators for various operational conditions.
Details specific alarms like Power ON, Low Voltage, and Temperature, plus LED condition meanings.
Details available battery types (Alkaline, Ni-Cd/Ni-MH, Li-Po/Li-Fe) for the transmitter.
Explains how to charge optional Ni-Cd or Ni-MH batteries via the transmitter's charging jack.
Critical warnings regarding the use and charging of Li-Po or Li-Fe/A123 battery packs.
Guides on connecting and properly mounting the 92010 (RX-461) receiver in the model.
Explains the meaning of the Bind LED states on the receiver for status indication.
Details how to adjust the forward/backward position of the throttle trigger for personal preference.
Explains how to adjust the left/right angle of the throttle trigger for optimal feel.
Instructions for installing an optional rubber grip for improved comfort and control.
Guides on adjusting the spring tension of the throttle trigger and steering wheel.
Details how to adjust the maximum left and right travel limits of the steering wheel.
Instructions for installing the included wrist strap anchor onto the transmitter.
Explains the layout and indicators of the Top Menu and Telemetry Menu displays.
Details the information presented in the Top Menu when the transmitter is turned on.
Describes the information shown in the Telemetry Menu for monitoring system data.
Further explains various indicators and displays on the LCD screens.
Details the functions of the Push-Button Rotary Dial and Back/Cancel key for programming.
Introduces the programming menus and how to access them using the transmitter controls.
Allows common programming changes for all channels in a single, convenient location.
Details how to modify programming values within the Channel Set menu for each channel.
Explains how to adjust servo travel limits for steering, throttle high, and brake side.
Details how to adjust the Steering Dual Rate percentage for finer control.
To Next Page
