INTRODUCTION
SM YIF 2-A.1 GB 1-3
1.8 Accessories
RCW Wall Mounted Remote Control
The RCW remote control is mounted on the wall, and controls the unit either as an
infrared remote control or as a wired controller.
The wired remote control with larger LCD display provides the following functions
• Interconnecting wiring terminal block.
• On/OFF unit
• Choose the operating mode (Heating-Cooling-Dehumidification-Fan or
Automatic mode),
• Increase or decrease the setting temperature.
• Adjust the fan speeds (Auto/High/Medium/Low)
• Setting ON-OFF timer within 0.5hr-24hrs
• Air exchange (Fresh air) settings
• Sleep mode saves energy by preventing overcooling or overheating during night
time
• Energy saving function
• Technician functions
- Display of Outdoor Ambient Temperature
- Power-fail Memory Function Setting
- Setting of Ambient Temp. Sensor
- Setting of Fan Speed
- Failure Display
For further details, please refer to the Technical Service Manual.
1.9 Inbox Documentation
Each unit is supplied with its own installation, operation and remote control manuals.
To Next Page
Loading...
