Need help?Do you have a question about the Airwell SX 9 DC INV and is the answer not in the manual?
General| Refrigerant | R32 |
|---|---|
| Power Supply | 220-240V, 50Hz |
| Technology | Inverter |
| Type | Split System |
| Weight | 8 kg (Indoor) |
Technical specifications for the DUO50 DCI outdoor unit.
Performance and specification data for various indoor units.
Detailed specs for the FLO 9 DCI indoor unit.
Detailed specs for the FLO 12 DCI indoor unit.
Detailed specs for the K 9 DCI indoor unit.
Detailed specs for the K 12 DCI indoor unit.
Detailed specs for the SX 9 DCI indoor unit.
Detailed specs for the SX 12 DCI indoor unit.
Detailed specs for the BS 12 DCI indoor unit.
Operating temperature and voltage limits for the system.
Cooling and heating performance data for FLO 9 DCI.
Cooling and heating performance data for FLO 12 DCI.
Cooling and heating performance data for K 9 DCI.
Cooling capacity table for K 9 DCI.
Heating capacity table for K 9 DCI.
Cooling and heating performance data for K 12 DCI.
Cooling and heating performance data for SX 9 DCI.
Cooling and heating performance data for SX 12 DCI.
Cooling and heating performance data for BS12 DCI.
Cooling capacity table for BS12 DCI.
Heating capacity table for BS12 DCI.
Electrical wiring diagram for the DUO 50 DCI.
Refrigeration diagram for DUO 50 DCI cooling mode.
Refrigeration diagram for DUO 50 DCI heating mode.
Overview of the 5 protection codes.
Protection against indoor coil icing during defrost.
Protection against indoor coil overheating.
Protection against compressor overheating based on temperature.
Protection against compressor over current.
Protection against heat sink overheating.
Protection against outdoor coil icing during deicing.
Conditions that trigger deicing operation.
Procedure for outdoor coil deicing.
Protection against condensate water overflow.
Logic for condensate overflow detection in floor/ceiling models.
Logic for condensate overflow detection in other models.
Various jumper settings for unit control.
To Next Page