Need help?Do you have a question about the Airwell Wellea Split A R32 and is the answer not in the manual?
Technical drawings and measurements for the unit and wall bracket.
Checks and preparations before installing the unit.
Recommended clearance around the unit for maintenance access.
Steps for securely attaching the indoor unit to the wall bracket.
Procedures for connecting refrigerant pipes, including tightening torque.
Diagram and description of a typical system configuration.
Second application example with system diagrams and control logic.
Instructions for safely opening and accessing the unit's internal parts.
Identification and explanation of key internal components and their functions.
Diagram and overview of the main electronic control board.
Guidelines and cautions for refrigerant pipe installation.
Instructions and considerations for water piping installation.
Procedure for filling the water system and purging air.
Recommendations for insulating water pipes to prevent condensation and freezing.
General warnings and precautions for electrical wiring work.
Explanation of DIP switch functions for unit configuration.
Specific procedures for starting the unit in cold ambient conditions.
Essential checks to perform before the initial unit start-up.
Information on pump control and performance curves.
How to access and modify unit parameters via the user interface.
Final verification steps to ensure correct installation and operation.
Procedures for performing manual test runs of unit functions.
Initial steps and general advice for troubleshooting unit issues.
Common problems, possible causes, and corrective actions for unit malfunctions.
List of operating parameters reviewed for diagnosis and performance.
Table of error codes, malfunctions, and their associated failure causes.
To Next Page
General
