Why is my Airwell PNX DCI Nordic Air Conditioner not cooling or heating?
If your Airwell Air Conditioner appears to be running correctly, but there's no cooling or heating, a refrigerant leak is likely the cause. You should check the refrigeration system for leaks.
What to do if Airwell PNX DCI Nordic compressor is on but outdoor fan is not working?
If the compressor of your Airwell Air Conditioner is running but the outdoor fan isn't working, there may be an issue with the outdoor electronics or the fan itself. Check the outdoor fan motor following the appropriate procedure. If the motor is not working, replace the controller.
Why is my Airwell PNX DCI Nordic Air Conditioner working in the wrong mode?
If your Airwell Air Conditioner is operating in the wrong mode, such as cooling instead of heating or vice versa, first check the RV power connections. If those are okay, test the RV operation using a direct 230VAC power supply. If it works correctly with the direct power supply, replace the outdoor controller.
Why won't the compressor start on my Airwell PNX DCI Nordic?
If the compressor on your Airwell Air Conditioner isn't starting, it could be due to an electronics control problem or protection being activated. Perform diagnostics to determine the specific issue and follow the recommended actions.
What causes 'Bad Communication' error on Airwell PNX DCI Nordic Air Conditioner?
If your Airwell Air Conditioner is showing bad communication, this indicates low reliability in communication quality. Check the wiring and grounding between the indoor and outdoor units.
How to fix Airwell PNX DCI Nordic Air Conditioner indoor/outdoor unit communication mismatch?
If there's a communication mismatch between the indoor and outdoor units of your Airwell Air Conditioner, it's likely that the indoor and outdoor controllers are different versions. Replace the indoor controller to resolve this issue.
What to do if Airwell PNX DCI Nordic indoor fan does not start?
If the indoor fan of your Airwell Air Conditioner isn't starting, first switch the unit to cool mode to see if that resolves the issue. If the fan still doesn't start, it could be a problem with the PCB or capacitor. In this case, change to high speed and check the power supply to the motor. For a triack controlled motor, it should be higher than 130VAC; for fixed speed motors, it should be higher than 220VAC. If the power supply is correct, replace the capacitor; if not, replace the controller.
How to fix 'No Communication' error on Airwell Air Conditioner?
If your Airwell Air Conditioner shows a 'No Communication' error, the communication or grounding wiring may be faulty. Check the wiring and grounding between the indoor and outdoor units.
Why is my Airwell Air Conditioner leaking water from the indoor unit?
If you notice water leaking from the indoor unit of your Airwell Air Conditioner, the drainage tube is likely blocked. Inspect the tube and clear any blockage.
What to do if Airwell Air Conditioner unit does not respond to remote control?
If your Airwell Air Conditioner isn't responding to the remote, first check the remote's batteries. If the batteries are fine, inspect the display and its wiring. If everything seems okay, consider replacing the display PCB. If the problem persists, the controller may need to be replaced.
General| Refrigerant | R32 |
|---|---|
| Energy Efficiency Ratio (EER) | 3.21 |
| Coefficient of Performance (COP) | 3.61 |
| Power Supply | 220-240V, 50Hz |
| Energy Efficiency Class (Cooling) | A++ |
| Energy Efficiency Class (Heating) | A+ |
| Type | Split System |
| Features | Wi-Fi Control, Sleep Mode |
To Next Page