To Next PageTo Next Page
Need help?Do you have a question about the Airwell HKD DCI Series and is the answer not in the manual?
General| Brand | Airwell |
|---|---|
| Model | HKD DCI Series |
| Category | Air Conditioner |
| Language | English |
Instructions to prevent injury and property damage during operation and installation.
Crucial warnings related to installation, electrical work, and handling.
Guidelines for safe and efficient operation, including handling, cleaning, and maintenance.
Important cautions regarding refrigerant checks, drain hose installation, and unit placement.
Lists indoor and outdoor unit models with their corresponding capacities and part numbers.
Details the various functions and optional filters available for the units.
Detailed technical specifications for the AWSI-HKD009-N11 indoor and AWAU-YKD009-H11 outdoor units.
Technical specifications for the AWSI-HKD012-N11 indoor and AWAU-YKD012-H11 outdoor units.
Technical specifications for the AWSI-HKD018-N11 indoor and AWAU-YKD018-H11 outdoor units.
Technical specifications for the AWSI-HKD024-N11 indoor and AWAU-YKD024-H11 outdoor units.
Provides physical dimensions, clearances, and detailed drawings for indoor units.
Provides physical dimensions, clearances, and detailed drawings for outdoor units.
Presents cooling and heating performance data and capacity ratio graphs.
Presents cooling and heating performance data and capacity ratio graphs.
Presents cooling and heating performance data and capacity ratio graphs.
Presents cooling and heating performance data and capacity ratio graphs.
Illustrates the flow of refrigerant through the system during cooling and heating.
Diagram illustrating the internal wiring connections for indoor units.
Diagrams detailing the wiring for specific outdoor unit models.
Provides torque values for installation fittings and cable connection guidelines.
Details pipe length, elevation limits, and refrigerant charge for different models.
Covers initial installation, leak checks, and air purging with vacuum pump.
Procedures for adding refrigerant for long pipes and after system operation.
Steps for collecting refrigerant and air purging during re-installation.
Procedures for system evacuation and refrigerant charging for re-installation.
Specifies optimal operating temperature ranges for cooling, heating, and drying modes.
Defines abbreviations, explains display icons, and details main protection features.
Covers fan rules, heating mode, auto, defrosting, and drying operations.
Explains follow me, silence, leakage detection, self-clean, and point check functions.
Crucial safety warning regarding discharging capacitors before servicing.
Lists indoor unit error codes (E0-F5, EC, P0-P2, P4) and their meanings.
Diagnosis and solution for EEPROM parameter errors, including PCB replacement.
Diagnosis and solution for communication errors between indoor and outdoor units.
Diagnosis and solution for fan speed control errors.
Diagnosis and solution for temperature sensor open circuit or short circuit issues.
Diagnosis and solution for refrigerant leakage detection errors.
Diagnosis and solution for overload current protection errors.
Diagnosis and solution for IPM malfunction or IGBT over-strong current protection.
Diagnosis and solution for over/under voltage protection errors.
Diagnosis and solution for high temperature protection of the compressor top.
Diagnosis and solution for inverter compressor drive errors.
Procedures for checking key components like temperature sensors and compressors.
Tables showing resistance values of temperature sensors at various temperatures.
Procedure for checking compressor windings by measuring resistance.
Diagrams and parts lists for all AWSI indoor unit models.
Diagrams and parts lists for all AWAU outdoor unit models.
