Need help?Do you have a question about the Airwell X 1900 AR and is the answer not in the manual?
General| Heating Capacity | 19000 BTU/h |
|---|---|
| Power Supply | 220-240V, 50Hz |
| Air Flow Rate | 850 m³/h |
| Refrigerant | R410A |
| Type | Split System |
Explains the hermetic compressor and circuit protection components.
Details the coaxial condenser and pressure valve for AO models.
Lists compressor, heater, fan motor, and circuit protection mechanisms.
Presents cooling capacity values based on air temperatures.
Details cooling capacity with wasted water supply.
Presents cooling performance data using recycled water.
Details fan specifications, speeds, and power consumption.
Shows pressure loss against water flow rate.
Lists nominal flow, temperature, and pressure for water supply.
Illustrates heating performance based on water/air temperatures.
Provides coefficients (K1, K2) for calculating capacity.
Lists capacity, flow, and temperature data for hot water coils.
Details power, flow, and pressure loss for hot water coils.
Lists power input, stages, and elements for electric heaters.
Describes filter material, dimensions, efficiency, and classification.
Explains the functions of the unit's control panel switches.
Identifies main components of the air treatment unit.
Provides detailed dimensions for the front view of the unit.
Provides detailed dimensions for the rear view of the unit.
Specifies required clearances for installation from all sides.
Shows dimensions and required clearances for the outdoor unit.
Illustrates different condenser-to-indoor unit pipework configurations.
To Next Page