25
ICE CFA1120A-3360A & CGA3180A I&O Manual 03/2021 Rev.5
If ordred, the lifting brackets are shipped attached to the back panel of the unit. These brackets provide
a method for lifting the unit. The installation of the brackets is described in Section 2.6.
Kit Components:
Accessories:
The package may include other factory-supplied items (optional):
P/N Description
70705 CommStat 6 2/4 HVAC Controller, Solid State Lead/Lag Controller
S/12087-04 CommStat 6 4/8 HVAC Controller, Solid State Lead/Lag Controller
S/12087-06 CommStat 6 6/12 HVAC Controller, Solid State Lead/Lag Controller
S/07846 CommStat 4 HVAC Controller, Solid State Lead/Lag Controller
S/04581 CommStat 3 HVAC Controller, Solid State Lead/Lag Controller
50123 Digital thermostat. 1 stage heat, 1 stage cool. 7 day programmable. Fan switch: Auto &
On. Auto-change over. Keypad lockout. Non-volatile program memory.
93189 Double Deection Aluminum Supply Grille for the CFA1120/1150 & CFA3150
42½ x 15
1
/
4
(1,080mm x 387mm)
93188 Aluminum Return Filter Grille for the CFA1120/1150 & CFA3150
42½ x 21½ (1,080mm x 546mm)
93190 Double Deection Aluminum Supply Grille for the CFA3180/3240/3300/3360
54½ x 15½ (1,384mm x 394mm)
93191 Aluminum Return Filter Grille for the CFA3180/3240
54½ x 21½ (1,384mm x 546mm)
93192 Aluminum Return Filter Grille for the CFA3300/3360
54½" x 37½" (1,384mm x 953mm)
Additional Items Needed:
Additional hardware and miscellaneous supplies (not furnished by ICE
®
) are needed for installation.
The list below has the items typically needed for mounting a unit on a wood frame wall structure.
Concrete or berglass structures have different requirements. ICE cannot recommend a specic method
of attaching the air conditioner to the building due to the wide variety of building types, code require-
ments, wall construction and specic installation conditions. The installation of the air conditioner to
the building must take in to account all of these factors and follow best industry practices to provide a
safe and secure attachment to the building.
• Mounting bolts for unit mounting anges. The length needed is typically the wall thickness plus
one inch (25 mm).
• Washers
• Hex nuts
• Silicone Sealer to seal around cracks and openings
• Minimum 5 conductor low voltage multicolored wire cable (i.e. thermostat wire)
• Appropriate electrical supplies such as conduit, electrical boxes, ttings, wire connectors, etc.
• High voltage wire, sized to handle the MCA (minimum circuit ampacity) listed on the data plate.
• Over-Current Protection Device sized in accordance with the MFS (maximum fuse size) listed on
the unit data plate.
To Next Page
Loading...
Need help?
General
