ENGLISH 5
To listen with the headphones
Connect headphones with a stereo mini plug to the
PHONES \ jack.
En
After listening, select TAPE/6 STANDBY with
FUNCTION to turn the power off.
NOTE
• Do not use irregular shape CDs (example: heart-
shaped, octagonal ones).
It may result in malfunctions.
• Do not place more than one disc in the disc
compartment.
• Do not try to open the disc compartment during play.
• Do not touch the lens. Doing so may cause
malfunctions.
PROGRAMMED PLAY
Up to 16 tracks can be programmed from the disc.
1 In stop mode, press PROG.
“Pr” and the program indicator flash.
2 Press r, t to select a track, then
press PROG to store it.
“Pr” and the program indicator flash again.
3 Repeat step 2 to program other tracks.
4 Press PROG to finish the program.
The numbers of the programmed tracks are
displayed in order.
5 Press e to start play.
The program indicator lights up while the unit is in
programmed play mode.
To check the program, press PROG twice in stop
mode.
To clear the program, press s once in stop mode so
that the program indicator is turned off.
To change the programmed tracks, clear the
program and repeat all the steps again.
To add a track to the program, repeat steps 1 and 2
in stop mode. The new track will be added after the last
programmed track.
To Next Page
Loading...
Need help?
General
