ENGLISH 7
En
If an erroneous display or malfunction occurs
Disconnect the AC cord and remove all the batteries to
turn off the display.
Leave the unit for a while and turn the power back on.
Maintenance
To clean the cabinet
Use a soft cloth lightly moistened with mild
detergent solution. Do not use strong solvents
such as alcohol, benzine or thinner.
To clean the heads
When the tape heads are dirty;
- high frequency sound is not emitted
- the sound is not adequately high
- the sound is off-balance
- the tape cannot be erased
- the tape cannot be recorded on
After every 10 hours of use, clean the tape heads
with a head cleaning cassette.
Use separately sold dry-type or wet-type cleaning
cassette.
Refer to the instructions of the cleaning cassette
for details.
To clean the lens
Use a cotton swab
slightly moistened with
cleaning fluid. Wipe
gently from the center
to the edge.
Specifications
Tuner section
Frequency range, antenna — FM: 87.5 - 108.0 MHz
Rod antenna, AM: 530 - 1,710 kHz Ferrite bar antenna
Deck section
Track format — 4 tracks, 2 channels / Frequency range
— Normal tape: 50 - 8,000 Hz (EIAJ) / Recording
system — AC bias / Erasing system — Magnet erase /
Heads — Recording/playback head (1), Erasure head
(1)
CD player section
Disc — Compact disc / Scanning method — Non-
contact optical scanner (semiconductor laser)
General
Speaker — 100 mm cone type (2) / Output —
Headphones jack (stereo mini-jack) / Power output —
1.5 W + 1.5 W (EIAJ 8 ohms, T.H.D. 10% DC) / Power
requirements — DC 12 V using eight size D (R20)
batteries, AC 120 V, 60 Hz / Power consumption —
11 W / Dimensions (W × H × D) — 370 × 193 × 219 mm
(14
5
/
8
× 7
5
/
8
× 8
5
/
8
in.) / Weight — 2.35 kg (5 lbs. 3
oz.) (excluding batteries) / Accessory — AC cord (1)
Specifications and external appearance are subject to
change without notice.
COPYRIGHT
Please check the copyright laws relating to
recordings from disc, radio or external tape for the
country in which the machine is being used.
Lens
To Next Page
Loading...
Need help?
General
