Basic Operations
11
GB
Use these buttons for additional operations
X
xZ
z
OPERATE
MODE
To Press
stop recording xZ
pause recording X
Press the button again to resume
recording.
turn on/off the player OPERATE
Tips
• Adjusting the volume or the
audio emphasis (see page
16) will not affect the
recording level.
• If the MW/LW programme
makes a whistling sound
after you have pressed z in
step 4, press MODE to
select the beat mode (“bEAt
1”, “bEAt 2” or “bEAt 3”)
that decreases the noise the
most.
• For the best results, use the
AC power as the power
source for recording.
• To erase a recording,
proceed as follows:
1 Insert the tape whose
recording you want to
erase.
2 Set the function switch to
TAPE.
3 Press z.
4 Press z to start recording.
(N is depressed automatically.)
Function switch
To Next Page
Loading...
Need help?
General
